Solar separated system - Jiangsu Gomon Group

Solar separated system

*The controller will switch on the pump when the temperature at the
collector sensor is higher than the return temperature by at least the pre
selected (delta T) amount.
*The pump circulates a heat transfer liquid around the loop.
*Heat from the collector is transferred to the domestic water through the heat
exchange coil in the tank.
*With the pump running, if delta T is not met, the pump will switch off.
*When a preset tank temperature is reached, the controller switches off the
pump.
*When there is not enough energy from collector, electrical heating element
will be automatically started by controller
*The check valve (non-return valve) prevents heat from the tank rising
towards the collector should the tank be warmer (e.g. at night).